“Pre-owned” is good for your business, better for your budget and great for our environment!
OUR INVENTORY IS ALWAYS CHANGING SO CHECK BACK OFTEN! IF YOU PREFER NEW EQUIPMENT, CONTACT US FOR A QUOTE.
OVER 40 YEARS IN THE BUSINESS HAS CREATED A VAST NETWORK, AND OUR BROAD BASE OF INDUSTRY CONTACTS BENEFITS YOU!
SERVING YOU WITH EXCELLENCE TO EARN YOUR REPEAT BUSINESS IS OUR #1 GOAL! WE VALUE OUR RETURNING CUSTOMERS
BUY WITH CONFIDENCE. WE HAVE 100% POSITIVE FEEDBACK AND EXPORT ALL OVER THE WORLD WITH MANY RETURNING CUSTOMERS.
Click here to edit Spacer module.
Click here to edit Spacer module.
Available Inventory
Call for Details
AM MFG Scale O Mattic S300
Dough Divider Rounder produces 2000 dough balls an hour
$18,000
ACME 88- 8 Foot Dough Sheeter
Comes with parts to shorten conveyor
$6,250
2013 Hobart 6801 Meat saw
This meat saw is in excellent condition. It is 3 HP, 3 phase
$5,650
Hobart 84186 Buffalo Chopper
Came from the school board.
Has hub.
$3450
Erika 11/30 Semi Automatic Dough Divider Rounder
3 phase. 208-230 volt.
$3,600
Taylor 794 Ice Cream Machine
Serve two separate soft serve flavors, or an equal combination of both in a twist. Water cooled. Have 7 available
$6,200
Vulcan G30C 30 Gallon Gas Tilt Skillet Braising Skillet
Came from the school board.
Has hotel pan dump attachment.
$3450
Hobart V1401 140 Gallon Mixer
This mixer came from the school board. Comes with hook and food grade
$4,500
Taylor 794 Ice Cream Machines
Serve two separate soft serve flavors, or an equal combination of both in a twist. Water cooled. Have 7 sister machines available. Used for 18 months.
$43,400
Alto Shaam ED2-48 Hot Display Case
Came from the school board.
Has stainless steel base with castors.
$2250
CoBatCo MD10SSEL Waffle Cone Maker
This waffle cone maker was only used for 6 months. 110 volt
$275
Structural Concept HV38R Refrigerated Display Case
Deli or Bakery refrigerated case.
$2500
Bakery Table with Stainless Steel Removable Top and Polyboard Underneath
8′ long the 3′ wide.
Has stainless steel base with castors.
$2250
Hobart M802 80 Quart Mixer
Came from the school board.
Hobart checked it out.
$7995
Galley 5 Bay Steamtable
Came from the school board. On castors.
$1750
Garland Double Steamer with GG250 Kettle
Propane steamer and kettle with a common boiler.
At a church, hasn’t been used in years, works great.
$2800
Blakeslee DD40 40 Quart Mixer
Came from the school board.
$3200
Cleveland KDM 40T Tilt Kettle
40 gallon kettle. Came from the school board.
Remote does not have a boiler.
$2400
Alto Shaam Roll-In Stainless Steel Bun Pan Rack
Like new Alto Shaam #5017976
Sells new for $1800
$1050
Stainless Steel 4 compartment sink
18′-20′ four compartment sinks, many with disposals,and turbowash pumps.
Came from the school board.
$1250
Friedrich FMP 400 Rotisserie Oven
Holds up to 400 pounds of meat. 12 racks, 6 lift off. Works as convection oven with fan. 3 phase or single phase.
$3,900
Hobart HCM 450 Chopper Mixer
Came from the school board
208-230, 3 phase
$3,600
Henny Penny H600 Gas Pressure Fryer
Natural gas fryer with filtering system.
Came from the school board.
$3,200
Hardt Natural Gas Chicken Rotisserie
Holds up to 40 Chickens
$3,200
Hobart 84186 cutter mixer
Came from the school board. 18″ bowl.
$2995
Beverage Drink Rack for Cooler
Rack is on castors. 30″ x 38″ x 70″ high.
Have 3 available. Price is for each.
$175
Hobart HCM 300 Cutter Mixer
The cutter mixer came from the school board
$3,195
Blodgett Gas Convection Oven
Came from the school board.
Natural Gas.
$4995
Hill Phoenix Glass 4 Door Remote Cooler
Back has access to cooler.
Remote, cooler was run off rack system.
$975
Blodgett DFG 100 Convection Oven
In excellent condition. Propane gas. Came from the school board.
$5,895
Banner 60833 Beer Chiller Power Pack Glycol Chiller
Beer dispensing equipment.
1/3 HP. 12.8 Amps. 37.2 LRA
$4995
Hill Phoenix Glass 4 Door Remote Cooler
Back has access to cooler.
Remote, cooler was run off rack system.
$975
Alto Shaam 10.20ESG Gas Combi Oven
In excellent condition. Natural gas.
$6,995
Terms and Conditions
Reasonable effort has been made to assure accuracy of the information provided on this site and is not represented to be error free. Please contact us for verification of availability, and any other clarification required to help you with your purchase decision.
How to change the saw blade on your Hobart meat saw
Remove the upper and lower pulley covers. Raise the gauge plate to its vertical position. Remove the right table by lifting its right side and sliding the table to the right to free it from the locating pins. Remove the column guard. Turn the tension adjuster counterclockwise until it stops (this will release tension on the blade by raising the lower pulley). Raise the plastic blade guide on the lower blade guide assembly and release the blade from the upper and lower blade guides. Free the blade from the blade scrapers in the lower pulley area and release it from the pulleys. Remove the blade. Make sure the pulleys are properly installed and the pulleys are latched. Install the new blade with the teeth pointing to the right and down as you face the front of the saw. The blade must fit between the V’s on the blade scrapers, in the slots of the upper and lower blade guides, and must not touch any of the pulley flanges. The lower blade guide must be installed after the blade is installed. Reinstall any removed parts. After the blade has been installed, set the blade tension by turning the tension adjuster clockwise until it stops.
How often should you replace your Taylor tune up kit?
You should replace your Taylor tune up kit containing seals, o rings, and gaskets, every 3-4 months. Make sure you replace your scrapper blades at the same time.
If your Attachment Touches the Bowl of your Hobart 60-140 Quart Mixer
You should check your machine’s agitator clearance regularly. If it touches the bowl, this can do damage to the bowl itself and different components inside the unit. In some cases, the bowl clamp might not be closed or improperly adjusted. Here are standard instruction for readjusting the attachments on Hobart mixers:
- Step 1 – Unplug your mixer.
- Step 2 – Remove the apron by unfastening the thumbscrews.
- Step 3 – Adjust the stop screw on the unit by loosening the bottom locking nut and turning the stop screw. Turn it counterclockwise to increase clearance or clockwise to decrease clearance. Tighten the locking nut as you hold the stop screw.
- Step 4 – Place the apron back on, and secure it to the unit by fastening the thumbscrews.
- Step 5 – Plug the mixer back in. Check the adjustment by operating the bowl lift a few times. Make sure to check your manual for the mixer’s proper maximum clearance.
Payment
Currently we do not accept credit cards or PayPal. We do accept checks and wire transfers. Items are released upon acceptance of terms and conditions, and funds clearance.
Shipping
Once item is paid in full, it will be released to you or your freight carrier. You must transact with the freight carrier directly. We will assist in locating a freight carrier, garnering a freight quote, and furnishing tracking information once the item has been picked up by your freight carrier. In some cases, final weights and dimensions cannot be determined until packaging is completed.
Warranty (Used Equipment)
We guarantee this equipment is operational at our location in Lakeland Florida, and encourage you or your representative to visit our location and verify.
We make no warranty or representation regarding the quality, condition, reliability, performance, completeness or fitness of any piece of used equipment. All USED equipment is sold “AS IS”.
ALL SALES ARE FINAL. THERE ARE NO RETURNS, REFUNDS, OR CANCELLATIONS.
Bulger Equipment LLC hereby covenants with Buyer that any item purchased is free and clear of all liens and encumbrances and that Bulger Equipment LLC has the right and lawful authority to sell item to buyer.
Venue
Any transaction disputes will be resolved in Polk County, Florida under the laws of the State of Florida.
Testimonials
Good seller. I highly recommend them. I bought a Hobart V1401 mixer that is in excellent condition.
A. P. Bell
I have bought two S300 scale o matics from the Bulger’s in the last 5 years. Very happy with my purchases.
Sami
Great seller. Good Communication. Will call again with any equipment needs in the future.
R. L. Page
Great company to do business with. Was able to go by their shop and run the 36 part divider with dough, to make sure it would work with our mixture.
Luigi
Bought a double stack Blodgett Mark V. Came back and bought another single stack for my other location. Easy company to work with.
Bob L.
I have been buying equipment from them for the past 12 years. I call them first to see if they have equipment I need, before checking with anyone else.
Christina
Used equipment is the cleanest we have ever seen!
They run it for you before you purchase.